Quarry and mining

NEW Industrial grapple bucket

INDUSTRIAL GRAPPLE BUCKET

GBP 1,600 o.n.o + VAT

For track loader, skid steer,

♦Suitable for demolition&recycling
♦Heavy duty construction
♦Twin cylinder with ram protection
♦Low side allow material wider than bucket to be carried
♦Two piece independent grapples
♦Hydraulic pressure relief valve avoids hydraulic system overload
♦Complete with bolt on reversible cutting edge
♦Grease pins throughout

Technical Data: 

Size: 2080mm (82inches)
Capacity: 0.70cu.m
Weight: 530

Technical Specification

TRS 1475 Rock Hawg

TRS 1475 Rock Hawg works through solid rock and produces stones, gravel and sand.

As well as eliminating the need for blasting, the rockhawg also produces a material that can bypass the primary stage of crushing. The rockhawg’s high production output makes it not only useable for construction projects, but also in quarries where a single machine could meet the material requirements for smaller production facilities and

Step Shank Tools

Whether working in soft conditions, rocky and abrasive soils, or hard-packed frozen ground, Kennametal has the unbeatable cutting tool/block combinations to optimize your performance.
Tools:
• Step Shank TS series cutting tools for any conditions
• Wide collars for the best block protection and rotation.
• Solid carbide tips in all geometries for all conditions.
Blocks:
• Heavy-duty all-steel designs.
• Wide weld chamfers for strength and rigidity.
• Increased height for externally retained tools.
• Profiles designed to reduce drag, improve material flow, and increase strength.

Technical Data: 

Standard Tools:
TS5 For cutting extremely hard rock and concrete.
TS19C For abrasive or soft to medium-impact cutting conditions.
TS30C For medium to extremely-hard rock, and abrasive conditions.
Standard Blocks:
TH3* Heavy-duty barrel for maximum strength and rigidity.
C4/U43H For medium-duty applications.

Technical Specification

1" (25mm) Shank Tools

Whether working in soft conditions, rocky and abrasive soils, or hard-packed frozen ground, Kennametal has the unbeatable cutting tool/block combinations to optimize your performance.
Tools:
• 1" (25mm) Shank T series cutting tools for any conditions
• Wide collars for the best block protection and rotation.
• Solid carbide tips in all geometries for all conditions.
Blocks:
• Heavy-duty all-steel designs.
• Wide weld chamfers for strength and rigidity.
• Increased height for externally retained tools.
• Profiles designed to reduce drag, improve material flow, and increase strength.

Technical Data: 

Standard Tools:
T1 For cutting soft rock.
T5 For cutting medium rock.
T11 For cutting extremely hard rock and concrete
Standard Block:
C30H/U40H Heavy-duty design.

Technical Specification

KenCast

Featuring Kennametal carbide technology to ensure maximum performance, the KenCast range of wear production products from Kennametal offers superior wear resistance for significantly reduced operating costs.
Kencast is:
Easier to apply and tougher than brazed-on solid carbide tiles
Longer lasting and easier to apply than hardfacing material
More wear resistanct than standard or AR-type steels
Better at protecting the carbide particles than embedded weld overlays

Technical Data: 

KenCast Hardness Properties
Hardness ranges for composite ingredients:
tungsten carbide = 86-91 HRA
matrix steel = 52-58 HRC
base steel = 38-50 HRC

Technical Specification

TRS 1150 Rock Hawg

TRS 1150 Rock Hawg works through solid rock and produces stones, gravel and sand.

      		Syndicate content