Pipeline

Kennametal Power Belts for Road Planers

  1. Highly wear resistant, multi-layered woven sheathing
  2. Fibre-reinforced CR-plate
  3. Polyester rope for high power transmission and impact load
  4. Multi-layered tear-resistant cover plate with woven fabric inlay
  5. Base made from flexible high performance CR-blend

Vermeer T800HT

Used Vermeer T800HT Chain Trencher, clean and in working order
This machine is in good condition, has low hours and has had an easy life

Fitted with 6ft double chain boom 40” idlers 2109 chain cutting width at present is approx 24” (1.83cm x 60cm wide)
Choice of Digging Sizes from stock: MAX DIGGING WIDTH 36” (90CM)
2 off 6 ft single chain booms complete with idlers
1 off 8 ft single chain boom, no idler but same as previous
1 off single chain with 18" cutting pads fitted
2 off spare chains, these are new and unused but are rusty

Technical Data: 

Year of Manufacture; 1990
Recorded Hours Approx; 2,100 hrs
Engine; Detroit 6V53 Diesel, 194bhp, Spicer Gearbox
Weight; 20,185 kg approx.

Technical Specification

NEW Industrial grapple bucket

INDUSTRIAL GRAPPLE BUCKET

GBP 1,600 o.n.o + VAT

For track loader, skid steer,

♦Suitable for demolition&recycling
♦Heavy duty construction
♦Twin cylinder with ram protection
♦Low side allow material wider than bucket to be carried
♦Two piece independent grapples
♦Hydraulic pressure relief valve avoids hydraulic system overload
♦Complete with bolt on reversible cutting edge
♦Grease pins throughout

Technical Data: 

Size: 2080mm (82inches)
Capacity: 0.70cu.m
Weight: 530

Technical Specification

TRS 975 Trencher

Tesmec trenchers are the world leaders of advanced trenching technology and provide state-of-the-art solutions to solve any problem of trench excavation, with high productivity and cost effective work.

TRS 1475 Rock Hawg

TRS 1475 Rock Hawg works through solid rock and produces stones, gravel and sand.

As well as eliminating the need for blasting, the rockhawg also produces a material that can bypass the primary stage of crushing. The rockhawg’s high production output makes it not only useable for construction projects, but also in quarries where a single machine could meet the material requirements for smaller production facilities and

Step Shank Tools

Whether working in soft conditions, rocky and abrasive soils, or hard-packed frozen ground, Kennametal has the unbeatable cutting tool/block combinations to optimize your performance.
Tools:
• Step Shank TS series cutting tools for any conditions
• Wide collars for the best block protection and rotation.
• Solid carbide tips in all geometries for all conditions.
Blocks:
• Heavy-duty all-steel designs.
• Wide weld chamfers for strength and rigidity.
• Increased height for externally retained tools.
• Profiles designed to reduce drag, improve material flow, and increase strength.

Technical Data: 

Standard Tools:
TS5 For cutting extremely hard rock and concrete.
TS19C For abrasive or soft to medium-impact cutting conditions.
TS30C For medium to extremely-hard rock, and abrasive conditions.
Standard Blocks:
TH3* Heavy-duty barrel for maximum strength and rigidity.
C4/U43H For medium-duty applications.

Technical Specification

1" (25mm) Shank Tools

Whether working in soft conditions, rocky and abrasive soils, or hard-packed frozen ground, Kennametal has the unbeatable cutting tool/block combinations to optimize your performance.
Tools:
• 1" (25mm) Shank T series cutting tools for any conditions
• Wide collars for the best block protection and rotation.
• Solid carbide tips in all geometries for all conditions.
Blocks:
• Heavy-duty all-steel designs.
• Wide weld chamfers for strength and rigidity.
• Increased height for externally retained tools.
• Profiles designed to reduce drag, improve material flow, and increase strength.

Technical Data: 

Standard Tools:
T1 For cutting soft rock.
T5 For cutting medium rock.
T11 For cutting extremely hard rock and concrete
Standard Block:
C30H/U40H Heavy-duty design.

Technical Specification

TRS 1150 Rock Hawg

TRS 1150 Rock Hawg works through solid rock and produces stones, gravel and sand.

TRS 1150 Trencher

Used Tesmec TRS1150 chainsaw trencher

  •  Low Hours, Excellent Condition
  •  Year 2007
  •  CAT engine
  •  Machine configuration: Boom: 2,44m; Chain: 710 mm; Hydraulic crumb shoe; Air compressor kit; Safety kit; Light package
  •  Warranty, Job site start up and Operator training
Technical Data: 

TRS 1150 Trencher

Technical Specification

TRS 950 Trencher

Tesmec TRS 950 Trenchers can come as either SLO or SLO DG dfeaturing a double gear box for increased digging performance in the hardest ground conditions.

Syndicate content