Trencher Attachment

TRS 885 Trencher

Tesmec has introduced the TRS-885 as an entry-level trencher.
Weighing around 20tonnes, depending on specification, the TRS-885 is powered by a 152kW Caterpillar diesel engine.
The machine drives through a hydrostatic transmission and offers a cutting speed of 0-210m/min. Cutting depths of up to 1,520mm are available, with chain widths of 200-450mm.
The machine has been designed primarily for the European market and it offers automatic self-levelling, a truck loading conveyor and an offset cutting facility.
TRS 885 Chainsaw For:
- Small pipelines, Water and sewage lines
- Utilities

TRS 975 Trencher

Tesmec trenchers are the world leaders of advanced trenching technology and provide state-of-the-art solutions to solve any problem of trench excavation, with high productivity and cost effective work.

1" (25mm) Shank Tools

Whether working in soft conditions, rocky and abrasive soils, or hard-packed frozen ground, Kennametal has the unbeatable cutting tool/block combinations to optimize your performance.
• 1" (25mm) Shank T series cutting tools for any conditions
• Wide collars for the best block protection and rotation.
• Solid carbide tips in all geometries for all conditions.
• Heavy-duty all-steel designs.
• Wide weld chamfers for strength and rigidity.
• Increased height for externally retained tools.
• Profiles designed to reduce drag, improve material flow, and increase strength.

Technical Data: 

Standard Tools:
T1 For cutting soft rock.
T5 For cutting medium rock.
T11 For cutting extremely hard rock and concrete
Standard Block:
C30H/U40H Heavy-duty design.

Technical Specification

TRS 950 Trencher

Tesmec TRS 950 Trenchers can come as either SLO or SLO DG dfeaturing a double gear box for increased digging performance in the hardest ground conditions.

Tesmec TRS 950 SLO DG

Off set machine with self levelling undercarriage
Integrated truck loading and discharge swivelling conveyor. (foldable for transport)
Within 2.5m wide
Operators cab with air conditioning and heater
Cab folds for ease of transport
Crumbshoe and stabilisers
Built in Italy
This machine is in excellent condition ready for work and low hours
The machine can be supplied repainted will look like nearly new machine with new decals and signage
(photograph not this machine but similar machine)

Technical Data: 

Technical Specification
Year of manufacture: 2002
Recorded hours: 2,100
Trench width: 500mm - digging chain and plates will be new.(other sizes available from stock)
Trench Depth: 1520mm
Engine: 260HP
Weight: 26 tonnes

Technical Specification

TRS 1475 Trencher

The Tesmec TRS 1475 Rock Hawg works through solid rock and produces stones, gravel and sand.

As well as eliminating the need for blasting, the rockhawg also produces a material that can bypass the primary stage of crushing. The rockhawg’s high production output makes it not only useable for construction projects, but also in quarries where a single machine could meet the material requirements for smaller production facilities and

Technical Data: 

TRS 1475 Trencher

Technical Specification

TRS 1675 Trencher

The largest Tesmec trenching machine in the world, digging over 7 m in rock!Weighing over 140 ton, the Tesmec TRS 1675 XL chainsaw can dig:

  • 70 cm - 150 cm wide.
  • 0 - 7.2 m deep in rock.

With a choice of digging sizes available, this is the ideal machine where high production

Syndicate content